CUPOLEX Aerated structural flooring system made of recycled plastic domes having sizes in plan approximately 56x56 cm and various heights; they can be easily and rapidly interconnected forming a self-bearing structure suitable to admit the concrete pouring or other material to create a slab of variable thickness (depending on the overload), resting on pillars at the centre distance of 56 cm and with under-slab cavities.
BETONSTOP Recycled polypropylene element suitable for closing the side openings of CUPOLEX® during the simultaneous casting of the foundation and the slab.
Owing to its special shape it compensates the required dimensions different from those obtained by using CUPOLEX® module 56, with no need to cut the CUPOLEX® units. In that way CUPOLEX® will be suitable for all project dimensions.
CUPOLEX RIALTO Aerated structural flooring system of up to 250 cm in height made of domes, tubes and footings that can be rapidly interconnected and as such form a self-bearing structure suitable to admit the concrete pouring.
WINDI Aerated floor subbase for heights of 5 and 10 cm made of plastic elements having sizes in plan 56x56 cm; they can be easily and rapidly interconnected forming a self-bearing structure suitable to admit the concrete pouring or other material to create a slab of variable thickness (depending on the overload), resting on pillars at the centre distance of 56 cm and with under-slab cavities.
TUBIX TUBIX-T is a disposable cardboard form used for creating pillars with a round cross-section. These forms are lightweight and can be easily and rapidly erected.
CLIMABLOCK Climablock is an innovative system for the construction of reinforced concrete walls exploiting and combining the mechanical resistance of concrete and thermal insulation capacities of polystyrene in a single solution. The system is based on forms - the Climablock elements - that can be easily and rapidly interconnected forming a structure suitable for the pouring of concrete, which after the hardening of concrete guarantees high energy savings through insulation.
PONTAROLO ENGINEERING SPA via Clauzetto,20 33078 San Vito al Tagliamento (PN) Italy phone +39.0434.857010 P.IVA 00631040938
Pontarolo Engineering S.p.a. shall be not be deemed liable for any error or inaccuracy present
and reserves the right at all times and without prior notice to change any information herein
